MILLING MACHINES - UNCLASSIFIED ZIMMERMANN FZ42 USED
Ad expired; contact the seller to check if the machine is still available.
BRAND:
ZIMMERMANN MODEL:
FZ42 YEAR:
2012 STATE OF THE MACHINE:
USED PRICE:
LOCATION:
GERMANY
DESCRIPTION:
brand
Zimmermann
type
FZ42
year
2012
description
CNC portal milling machine
details
Machine No.
32
milling head
VH3
Control
Siemens 840D PL
Technical data basic machine
length: 128,000 mm, width: 12,000 mm, height: 12,200 mm
Weight (machine w. control cabinet)
t 149
Working range
longitudinal movement (X-axis): mm 12,500, vertical slide transverse movement (Y-axis): mm 5,000, vertical slide vertical movement (Z-axis): mm 3,500, column clear width: mm 6,130, cross beam clear height: mm 6,380
Feed rate max.
X-axis: m/min 50, Y-axis: m/min 60, Z-axis: m/min 50
Reduced Feed rate
set-up mode m/min 2
Operating mode 3
m/min 5
Acceleration max.
m/s2 3
Rated power of feed motors
X-axis 2x per side: kW 22, Y-axis 2x: kW 12.7,
Z-axis
kW 21.2
Accuracies of linear axes
positioning accuracy X-axis: mm ± 0.05, Y, Z-axis: mm ± 0.02, repeat accuracy X-axis: mm ± 0.025, Y, Z-axis: mm ± 0.01
Electrical connection
Operating voltage: V 400, frequency: Hz 50, rated power: kVA 210, rated current: A 305, back-up fuse (on-site): A 315, control voltage: V 24.
Compressed air (class 4 according to DIN-ISO-8573-1)
particle size in air max.: μm 15, particle density of solids: mg/m3 max. 8, oil concentration: mg/m3 max. 5, pressure dew point ° C max.: +3, connection bar: at least 6
Milling head
VH3
B-axis
Swivel angle without suction device
degrees ±110
With suction device
degrees +35 / -110
Swivel speed
degrees/s 60
Nominal swivel torque simultaneous
Nm 1,000
Holding torque clamped
Nm 2,000
C-axis
Slewing speed
deg/s 60
Swivel angle without suction device
degrees +270 / -450
With suction device
degrees ± 90
Nominal swivel torque simultaneous
Nm 1,000
Holding torque clamped
Nm 2.000
Milling spindle
Spindle power max.
constant from 6,000 min-1 KW 60
Torque max.
up to 5,000 min-1 Nm 95
Spindle speed, infinitely variable
min-1 10,000
Reduced milling spindle speed
set-up mode: min-1 2,000
Operating mode 3
min-1 5,000
Permissible vibrations max.
idle mode mm/s 3
continuous operation
mm/s 6
Short-term
(5 s) mm/s 10
Axial tensile load max.
N 750
Axial compressive load max.
N 6,000
notice
The machine has already been professionally dismantled.
location
39120 Magdeburg
Dechow-ID
V80371#102
GO TO THE
AUCTION FORM
AUCTION PRODUCTS
SALE DATES:
dal 19/04/2021 al 29/04/2021
PLACE OF SALE:
Multiple Locations
COUNTRY:
Germany
KIND OF SALE:
On-line auction
DESCRIPTION:
In this online auction you will find machines such as Zimmermann CNC portal milling machine, Skoda horizontal milling and drilling machine, UMARO vertical lathe, Liebherr concrete recycling plant and other equipment of a wind turbine manufacturer.
For more info
click here
SELLER: TROOSTWIJK VEILINGEN B.V.
KIND OF SELLER: Dealer
CONTACT: Veilingen Troostwijk
MOBILE:
PHONE:
ADDRESS:
Overschiestraat 59 Amsterdam () 1062 XD - Netherlands